Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) Exam (300-410) - Cisco

Exam Questions

94%

Students found the real exam almost the same

1,057

Students passed this exam after ExamsQA Prep

95.1%

Average score during Real Exams at the Testing Centre

Browse 603 Questions
💡

Browse at least 50% questions to maximize your chances of passing

Free Preview Questions

Sample 300-410 Exam Questions & Explanations

Practice with real question formats, multiple choice options, and detailed answer explanations for Cisco 300-410.

Question #1 Verified Q&A
Refer to the exhibit. Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue? 3/899
A Issue the no neighbor stub command on R2.
B Issue the eigrp stub command on R1
C Issue the eigrp command on R2.
D Issue the no eigrp stub command on R1.
Correct Answer: Issue the no eigrp stub command on R1.
Question #2 Verified Q&A
Refer to the exhibit. 4/899<br />
<br />
Which configuration configures a policy on R1 to forward any traffic that is sourced from the 192.168.130.0/24 network to R2? 5/899
A Option B
B Option C
C Option D
D Option A
Correct Answer: Option D
Question #3 Verified Q&A
R2 has a locally originated prefix 192.168.130.0/24 and has these configurations:<br />
<br />
What is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?
A R1 does not accept any routes other than 192.168.130.0/24
B R1 sees 192.168.130.0/24 as two AS hops away instead of one AS hop away.
C R1 does not forward traffic that is destined for 192.168.30.0/24
D Network 192.168.130.0/24 is not allowed in the R1 table
Correct Answer: R1 sees 192.168.130.0/24 as two AS hops away instead of one AS hop away.
Question #4 Verified Q&A
Which method changes the forwarding decision that a router makes without first changing the routing table or influencing the IP data plane?
A packet switching
B policy-based routing
C forwarding information base
D nonbroadcast multiaccess
Correct Answer: policy-based routing
Question #5 Verified Q&A
Refer to the exhibit. EIGRP 2 10.1.12.0/24 R2 10.1.23.0/24 2 2 .1 R1 10.1.1.0/24 10.1.24.0/24 R1 router eigrp 1 redistribute connected network 10.1.12.10.0.0.0 R3 router ospf 1 redistribute eigrp 1 subnets network 10.1.35.30.0.0.0 area 0 R4 router eigrp 1 router ospf 1 network 10.1.45.4 0.0.0.0 area 0 R5#traceroute 10.1.1.1 Type escape sequence to abort Tracing the route to 10.1.1.1 «output truncuated› OSPF 3 R3 10.1.35.0/24 5 R5 5 .4 10.1.45.0/24 R4 , redistribute ospf 1 metic 2000000 1 255 1 1500 1 10.1.35.3 80 msec 44 msec 20 msec 2 10.1.23.2 44 msec 104 msec 64 msec 3 10.1.24.4 44 msec 64 msec 40 msec 4 10.1.45.5 24 msec 40 msec 20 msec 5 10.1.35.3 92 msec 144 msec 148 msec 6 10.1.23.2 108 msec 76 msec 80 msec 9/899 The output of the trace route from R5 shows a loop in the network. Which configuration prevents this loop? A) B) R3 router eigrp 1 redistribute OSPF 1 route-map SET-TAG route-map SET-TAG permit 10 set tag 1 R4 router eigrp 1 redistribute ospf 1 metric 2000000 1 255 1 1500 route-map FILTER-TAG network 10.1.24.40.0.0.0 route-map FILTER-TAG deny 10 match tag 1 ! route-map FILTER-TAG permit 20 c) R3 router ospf 1 redistribute eigrp 1 subnets route-map SET-TAG ! route-map SET-TAG permit 10 set tag 1 R4 router eigrp 1 redistribute ospf 1 metric 2000000 1 255 1 1500 route-map FILTER-TAG ! route-map FILTER-TAG permit 10 match tag 1 11/899 D)
A Option B
B Option A
C Option C
D Option D
Correct Answer: Option A
Explanation:
The reason for the loop is that R2 is forwarding the packets destined to 10.1.1.1 to R4, instead of R1. This is because in the redistribute OSPF statement, BW metric has a higher value and delay has a 12/899 value of 1. So, R2 chooses R4 over R1 for 10.1.1.0/24 subnet causing a loop. Now, R5 learns 10.1.1.0/24 from R3 and advertises the same route to R4, that R4 redistributes back in EIGRP. If R3 sets a tag of 1 while redistributing EIGRP in OSPF, and R4 denies all the OSPF routes with tag 1 while redistributing, it will not advertise 10.1.1.0/24 back into EIGRP. Hence, the loop will be broken.

Want to practice all 603 questions?

Practice under real exam conditions with instant grading, timed simulations, and community insights.

Start Full 300-410 Practice Test

Frequently Asked Questions

Common questions about the Cisco 300-410 certification practice test

How many questions are in the Cisco 300-410 practice exam on ExamsQA?
Our 300-410 (Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) Exam) practice question bank currently includes 603 verified questions with comprehensive explanations.
Are the 300-410 exam practice questions up to date for 2026?
Yes, all Cisco 300-410 practice questions are regularly updated and verified against current exam objectives.
Will the 300-410 practice questions help me pass on my first attempt?
The 300-410 (Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) Exam) question bank is built to mirror the real exam's format and topics, with detailed explanations for every answer so you understand the reasoning — not just memorize responses.
Is there a free demo available for 300-410 Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) Exam?
Yes, ExamsQA offers free demo questions for the 300-410 exam so you can test the interface and question quality before purchasing full access.